From CSLabsWiki
Revision as of 12:53, 15 January 2016 by Jared (talk | contribs)
IP Address(es):
Contact Person: Jared Dunbar
Last Update: Spring 2016
Services: Various

Hostname: felix.cslabs.clarkson.edu
Operating system: Debian 8.2
NIC 1: Clarkson Network
MAC: 00:e0:81:b5:88:85
CPU: Intel Xeon E5410 @ 2.33GHz

Felix was constructed by Jared and Graham after Phoenix was unrecoverable without great effort. It was reformatted from the RAID 6 of Phoenix for the simplicity of the system and the expectation that nothing on Felix is really ever worth redundancy due to the likely inheritance of previous instability from Phoenix.

Felix was installed (on 1/15/16) from a Debian CLI install flashdrive with 64 bit Debian 8.2 Jessie. (Kernel 3.16.7 as of 1/15/16)

Install settings were the typical Debian settings with / being on the first 1 TB hard drive, and /var on the second 1 TB hard drive. The network interface that is connected is eth1.

After we finished installing we added the following packages:

htop vim libvirt0 libvirt-deamon libguestfs-tools openjdk-7-jdk p7zip-full virt-manager nvidia-legacy-304xx-driver screen rsync

The network interface is set up as follows:

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The hardware network interfaces
allow-hotplug eth0
allow-hotplug eth1
allow-hotplug eth2

#The software network bridge (VM's route through this)
auto br0
iface br0 inet static
        bridge_ports all

Graphics Card Setup

sudo vim /etc/modprobe.d/blacklist.conf

blacklist nouveau
blacklist nvidiafb

Services as of 1/15/16:

androbattery (Bobby Newman)