Difference between revisions of "Management"

From CSLabsWiki
Jump to: navigation, search
(Installing Management Clients)
Line 135: Line 135:
=Old Management (1.0)=
'''Management''' is a SBC (single board computer) used for monitoring the status of VM's on other machines and the status of the hardware in the server room, ie. checking the CPU, RAM, and hard drive stats, among other configurable things.
Each computer in the server room that is configured sends data periodically to '''Management''' which will be shown in an uptime page on a webpage that can easily be used to determine system uptime and service uptime among other things.
Also, you can view COSI network stats at http://management.cosi.clarkson.edu:8080/cacti with the csguest user (and default password)
Currently installed on the machine are the following:
htop openssh-client vim openjdk-7-jdk p7zip-full g++ sudo git upower apcupsd apache2 cacti mysql-server
If you need to update the maintainers list for a server, please contact Jared for the instructions on how to do so.
If there is an invalid key:value pair sent from your server and it is now in the listing, contact Jared if you want it removed.
If you want to add a server, install the management client, and then contact Jared to add the device to the list.
=Client Side (runs on a server)=
g++ top awk tail bash sed
The source code for the client executable is available online at https://github.com/jrddunbr/management-client
The bash scripts are made wherever necessary (it's expandable and each server can theoretically have as many keys as it wants, each data parameter is stored as a key) and here are some functional examples:
top -bn2 | \
grep "Cpu(s)" | \
sed -n '1!p' | \
sed "s/.*, *\([0-9.]*\)%* id.*/\1/" | \
awk '{print 100 - $1}')
echo $DATA
/manage/management-client 80 cpu $DATA
read _1 MEMTOTAL _2 <<< "$(head -n 1 /proc/meminfo)"
read _1 MEMAVAIL _2 <<< "$(tail -n +3 /proc/meminfo | head -n 1)"
DATA="$(( (MEMTOTAL - MEMAVAIL) / 1024 ))MB"
echo $DATA
/manage/management-client 80 used-ram $DATA
read _1 MEMTOTAL _2 <<< "$(head -n 1 /proc/meminfo)"
DATA="$(( MEMTOTAL / 1024 ))MB"
echo $DATA
/manage/management-client 80 total-ram $DATA
DATA=$(uptime -p | sed -e 's/ /_/g')
echo $DATA
/manage/management-client 80 uptime "$DATA"
Only install this one if you have a VM server running. This MUST be run as the root user.
    read ID NAME STAT;
    do echo "NAME=$NAME, STAT=$STAT";
    STAT=$(echo $STAT | sed -e 's/ /_/g')
    /manage/management-client 80 $NAME $STAT
done <<< "$(virsh list --all | tail -n +3)"
==Compiling Managemnet==
These scripts expect management-client.cpp to be compiled as
g++ management-client.cpp -o management-client --std=c++11
and to be in the /manage folder (for simplicity, I tend to put them all in the same folder).
* File:  management-client.cpp
* Author: jared
* Created on January 21, 2016, 3:50 PM
#include <cstdlib>
#include <iostream>
#include <fstream>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <netdb.h>
using namespace std;
class tcp_module {
    string address;
    int port;
    struct sockaddr_in server;
    int sock;
    tcp_module(string, int);
    void sendTcp(string);
tcp_module::tcp_module(string addr, int portNumber) {
    address = addr;
    port = portNumber;
    sock = socket(AF_INET, SOCK_STREAM, 0);
    if (sock == -1) {
        cerr << "Error creating the socket\nExiting\n";
    if (inet_addr(address.c_str()) == -1) {
        struct hostent *host;
        if ((host = gethostbyname(address.c_str()))) {
            cerr << "Error resolving host " << address << "\nPlease use an IP if you are not, exiting\n";
    server.sin_addr.s_addr = inet_addr(address.c_str());
    server.sin_family = AF_INET;
    server.sin_port = htons(port);
    if (connect(sock, ((struct sockaddr*) &server), sizeof (server)) < 0) {
        cerr << "Error connecting to host. Exiting.\n";
void tcp_module::sendTcp(string data) {
    if (send(sock, data.c_str(), data.length(), 0) < 0) {
        cerr << "Error sending data. Exiting\n";
bool isConnected = false;
void sendKey(tcp_module connection, string key, string data) {
    string send = "GET /" + key + "/" + data + " HTTP/1.1\r\n\r\n";
int main(int argc, char** argv) {
    if(argc !=  5) {
        cerr << "Error, not enough arguments!\n";
        cout << "\n  Usage:\n\n./[executable] host port key value\n";
        for(int i = 0; i < argc; i++) {
            cout << argv[i] << " ";
        cout << "\n";
    string key = argv[3];
    string data = argv[4];
    string host = argv[1];
    int port = atoi(argv[2]);
    tcp_module tcp(host, port);
    sendKey(tcp, key, data);
    return 0;
I also have one script that runs all of the client scripts. The Bash script that runs all the other bash scripts looks a lot like this:
===Bash Start Script===
cd /manage
while true
    /manage/cpu.sh &
    /manage/used-ram.sh &
    /manage/total-ram.sh &
    /manage/uptime.sh &
#    /manage/virsh.sh & # this is for if you have a virsh virtual machine system running, to monitor VM stats.
    sleep 20
It is easy to make more customized bash scripts that will complete other tasks. The compiled file has an expected input of ./management-client (IP) (PORT) (KEY_NAME) (VALUE) and this causes a key to go up, and saves at the value. When the server gets this as a rest call, the server reads it because it's listed in an internal file.
One thing to note is that it takes only 5 arguments: the executable, the IP, port, key, and value. Each one has to have no spaces in it. If you want your key or value to have a space, place an underscore and it will be replaced with a space. The error it tells you is basic, but informative. You must use an IP for the ip field, it will not accept hostnames.
Technically, management can recieve key:value pairs from servers outside of the server room or even Clarkson if it is configured in the networks.txt file and also in the master.yml file. (to be changed later)
=Server Side (management itself)=
The server side of the software is available at https://github.com/jrddunbr/management-server and is still a work in progress.
It requires the following to be installed:
openjdk-7-jdk wget upower apcupsd
You place the compiled .jar file in a handy place along with a few files (most found in the Github repo as examples):
index.html # a template HTML file that is used to list all of the servers, uptimes, and other data.
server.html # a template HTML file that is used to list one server and all of the associated key and value pairs that it has.
master.yml # a file that defines master keys, which are server side keys that define server characteristics locally, used to enable servers, specify if they are urgent to server uptime
servers/<servername>.txt # file that configures maintainers
Maintainers Listing (in servers folder)
c:<cell or other phone number>
You might need to create a servers folder if it crashes.
Inside the servers folder, there are configurable per-server configs.
Make sure that you check that your YAML files are parsed properly or I guarantee that the Java code will crash. There are a few good online checkers out there.
I made the startup script for the management server much the same as the client one.
The sh file is as follows:
cd /manage
date >> runtime.log
java -jar management-server.jar >> runtime.txt
=Hardware Implementation:=
Fetch Armbian Jessie for the pcduino 3. It's OK that it's not the nano lite version even though currently we are using a pcduino 3 nano lite.
Flash that to the SD card, log into the root user set the root password, and then run the reboot command. Wait for it to restart again, and then reboot.
At this point, the system has set up the SSH server, expanded / to the full size of the SD card (up to 32GB), as well as created an emergency 128MB swap partition.
Now, install a thing:
<pre>htop openssh-client vim openjdk-7-jdk p7zip-full g++ sudo git upower apcupsd</pre>
And now edit some files (make them contain this following contents):
vim /etc/hostname
vim /etc/network/interfaces
# Wired adapter #1
auto eth0
iface eth0 inet static
# Local loopback
auto lo
iface lo inet loopback
and edit the sshd config for the default cosi ssh port:
vim /etc/ssh/sshd_config
set the line that says Port
After you have done that, reboot.
You are now to follow the default instructions for setting up the software itself.
After that, install these:
apache2 mysql-server cacti
Add an SNMP device (ucd/net SNMP Host) that is the network switches.
After that, add graphs that are Bytes Total Bandwidth, for each ethernet port. From there, have fun configuring.
=Start Scripts:=
==System V Start Script==
/etc/init.d/manage  (the name of the control script will be manage - don't use any extension and make sure it is executable)
# Provides: manage                                        # this needs to match the name of the file
# Required-Start: $remote_fs $syslog $network $all
# Required-Stop: $remove_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
/usr/bin/java -jar /manage/management-server.jar > runtime.log &  # make your executable run in here.
and make that run at startup with:
update-rc.d manage defaults
For more on LSB start scripts, visit https://wiki.debian.org/LSBInitScripts
==Systemd Start Script==
/etc/systemd/system/manage.service: (the service will be called manage, due to the filename. Always append .service to the service file)
Description=manage                    # use a title for the application that will help someone realize what is going on
ExecStart=/bin/bash /manage/run.sh    # point this to the executable you intend to run.
#ExecStop=                            # point this to a stop script if you have one, if you don't it will just kill the process when you tell it to stop
===Systemd Helpful Tips===
systemctl enable <name> for enabling units
systemctl disable <name> for disabling
systemctl start <name> for starting
systemctl stop <name> for stopping
systemctl status <name> for the executable status.
Additional planned features (in this general order) are:
*thermal information
*graph display of events
*database system to store the data collected
*tell servers when exactly to power down in the event of an outage or over temp situation - alternatively, email maintainers to shut down the servers
[[Category:Web Service]]
[[Category:Web Service]]

Revision as of 23:03, 14 September 2016

IP Address(es):
Contact Person: Jared Dunbar
Last Update: February 2016
Services: server status indicator

Hostname: management
Operating system: Armbian (Debian) Jessie (kernel 4.4.1-sunxi)
NIC 1: eth0
MAC: 02:8e:08:41:65:6a
CPU: Hard Float Dual Core Allwinner A20 armv7l, Mali 400 MP2

Management (manage2server) is a vm used for monitoring the status of VM's on other machines and the status of the hardware in the server room, ie. checking the CPU, RAM, and hard drive stats, among other configurable things.

Each computer in the server room that is configured sends data periodically to Management which will be shown in an uptime page on a webpage that can easily be used to determine system uptime and service uptime among other things.

Also, you can view COSI network stats at http://management.cosi.clarkson.edu/cacti with the csguest user (and default password)

Installing Management Clients

Required Software: Git, g++, make

On Debian:

apt update && apt install make g++ git

Clone with Git

First, set git to allow all certificates, and get the files using Git.

git config --global http.sslVerify false
git clone https://gitlab.cosi.clarkson.edu/jared/manage2client.git

Optionally, re-secure the system by only accepting repos with certificates.

git config --global http.sslVerify true

Prepare files

Move the folder to the root.

mv manage2client /manage

Move the systemd service to the systemd serivces folder

sudo mv /manage/manage.service /etc/systemd/system/manage.service

Configure system

If the hard drive you want to track is not /dev/sda1, select a different mount point to track in totaldisk.sh and useddisk.sh

If you want to have virsh, edit run.sh, and un-comment the line with virsh.sh

If you want to poll faster, change sleep from 30 to 5. Any faster, and the Linux scheduler will fall behind on busy boxes.

Compile Management for your platform


Enable Systemd Services

sudo systemctl enable manage
sudo systemctl start manage

Sit back and relax! It should show up on a running manage2server momentarily.

Installing Management Server

Start with an Arch VM

Set Hostname



Clear the contents and enter this on the first line, and save


Set Network

Copy example ethernet-static to netctl folder

cp /etc/netctl/examples/ethernet-static /etc/netctl/ehternet



Clear the contents and set it to this:

Description='A basic static ethernet connection'
Interface=ens3 # Make sure this is the interface or you won't have a network